AIGOODELE
7.5kW Soft Starter for AC Compressor 380V 3-Phase | Prevents Surges
7.5kW Soft Starter for AC Compressor 380V 3-Phase | Prevents Surges
Couldn't load pickup availability
Product Description
AVH10-G series motor soft starter 3 phase motor soft starter
No contactor required, small volume,easy transportation and installation,reduce the shipping cost.
We strongly recommend AVH10-G type of motor soft starter for small power motor (especially for 5.5/7.5/11/15/18.5/22/30/37 motor)
This series motor soft starter is a new type start-up equipment which integrates electric force and electronic techniques,computer technique and modern control -theory.
It is the new generation product to replace the conventional Star-delta Starter,
Self-coupling voltage-drop Starter and Magnetic control voltage-drop Starter.
Our motor soft starters are widely used in thermal power generation, hydropower, transmission and distribution equipment, metallurgy, chemical industry, mining, construction and other industries.
The compressor uses current limiting to realize smooth start, reduce motor heating and prolong service life. The belt conveyor realizes smooth and gradual starting process through soft starting to avoid product movement and material overflow.
Make the field and environmental conditions
| Item | VH10 Online motor soft starter 3 phase motor soft starter | ||
| Input Power Supply | Input Voltage | Three-phase 380V ± 15% | |
| Frequency | 50/60Hz | ||
| Adaptive Motor | Squirrel-cage three-phase asynchronous motor | ||
| Starting Times | It is recommended not to exceed 20 times per hour. | ||
| Control Mode | 1) Operation panel control; 2) Operation panel + external control; 3) External control; 4) External control + COM control; 5) Operation panel + external + COM control; 6) Operation panel + COM control; 7) COM control; 8) No start or stop operation. |
||
| Start Mode | 1) Current-limiting start; 2) Voltage ramp start; 3) Kick start + current-limiting start; 4) Kick start + voltage ramp start; 5) Current ramp start; 6) Voltage current-limiting double closed-loop start. |
||
| Stop Mode | 1) Soft stop; 2) Free stop. |
||
| Protective Function | 1 Open loop protection for external instantaneous stop terminals; 2) Over-heat protection for soft starter; 3) Protection for too long starting time; 4) Input open phase protection; 5) Output open phase protection; 6) Unbalanced three-phase protection; 7) starting over current protection; 8) Running overload protection; 9) Under voltage protection for power voltage; 10) Over voltage protection for power voltage; 11) Protectionfor fault parameter setting; 12) Load short circuit protection; 13) Auto restart or incorrect wiring protection; 14) Incorrect wiring protection of external control stop terminals. |
||
| Ambient | Place to be used | Indoor location with good ventilation free from corrosive gas and conductivedust. | |
| Altitude | Below 3000M. It have to rise the rate power when the altitude is more than 3000M. | ||
| Ambient Temperature |
-30~+55 C |
||
| Ambient Humidity | ≤90%RH without dew condensation. | ||
| Vibration | <0.5G | ||
| Structure | Protection Class | IP20 | |
| Cooling Pattern | Natural wind cooling. | ||
Pump: make use of soft stop function to relieve the influence of water hammer so as to save system maintenance cost.
Ball mill: make use of voltage ramp startup to reduce gear torque friction so as to save cost and time.
Fan: reduce belt friction and mechanical conflict to save maintenance cost.
Compressor: make use of current limitation function to realize smooth startup so as to reduce motor heating and prolong its service life.
Conveyor: make use of soft start to realize smooth and gradual startup process in order to avoid product move and liquid overflow.
Electric motor/Water storage/Ventilator/Food mixer/Air compressor/Conveyors/Stone crusher/Pulverizer/Heavy-duty machinery and equipment
| No. | Function | Setting range | Default value |
Permission | Mod bus address |
| F00 | Control mode | 0: Keyboard control 1 : External control 2: Communication control 3:Keypad + external control 4: Keyboard ten communication 5: external control ten communication 6: Keyboard 10 communication + external control |
1 : External control |
Read-write | 0 |
| F01 | Starting mode | 0: Voltage ramp start 1 : Current limiting start |
0: Voltage ramp start |
Read-write | 1 |
| F02 | Starting current limit value | 50%~600% | 3 | Read-write | 2 |
| F03 | Percentage of starting voltage | 30%~80% | 0.3 | read-only | 3 |
| F04 | Starting time | 1s~120s | 10S | read-only | 4 |
| F05 | Soft stop time | Os~60s | 0S | Read-write | 5 |
| F06 | Starting overcurrent protection current | 50%-601% 601%indicates closure |
5 | Read-write | 6 |
| F07 | Starting overcurrent protection time | 0~120s | 2s | Read-write | 7 |
| F08 | Running overcurrent protection current | 50%-601% 601%indicates closure |
2 | Read-write | 8 |
| F09 | Running overcurrent protection time | 0~999s | 2s | Read-write | 9 |
| F10 | Undercurrent protection current | 10%~100% 100% indicates closure |
0.5 | Read-write | 10 |
| F11 | Undercurrent protection time | 0~120s | 5s | Read-write | 11 |
| F12 | Unbalance degree | 20%~100% 100% indicates closure |
0.4 | Read-write | 12 |
| F13 | Unbalance protection time | 0~120s | 5s | Read-write | 13 |
| F14 | Overvoltage protection multiplier | 100%~140% 100% indicates closure |
1.2 | Read-write | 14 |
| F15 | Overvoltage protection time | 0~120s | 5s | Read-write | 15 |
| Undervoltage protection times | 50%-100% 100%indicates closure |
0.8 | Read-write | 16 | |
| F17 | Undervoltage protection time | 0~120s | 5s | Read-write | 17 |
| F22 | Motor rated current | 1~500A | 30A | Read-write | 20 |
| F23 | Address | 1~64 | 1 | Read-write | 21 |
| F24 | Baud rate | 0: 2400 1: 4800 2: 9600 3:19200 |
2: 9600 | Read-write | 22 |
| F25 | Software version | read-only | 23 | ||
| U0 | Main control software version | read-only | 100 | ||
| U1 | Soft start status | 0: Standby 1 : Soft Start 2: Run 3: Soft Stop 5: Fault |
101 | ||
| U2 | Current Fault | 0: No fault 1 : Input phase loss 2: Output phase loss 3: Starting overcurrent 4: Running overcurrent 5: Undercurrent 6: Current unbalance 7: Phase sequence protection 8: Soft start overheat protection |
102 | ||
| U3 | Average Output Current | 103 | |||
| U4 | Input Voltage | 104 | |||
| U5 | A-phase current | 105 | |||
| U6 | B-phase current | 106 | |||
| U7 | C-phase current | 107 | |||
| U8 | Three-phase unbalance | 108 | |||
| U9 | Power Supply Phase Sequence | 109 | |||
| U10 | Soft start temperature switch status | 110 | |||
| U11 | Percentage of Starting Completion | 111 | |||
| First fault record | 200 | ||||
| Second fault record | 201 | ||||
| Third fault record | 202 | ||||
| Fourth fault record | 203 | ||||
| Fifth failure record | 204 | ||||
| Sixth failure record | 205 | ||||
| Seventh failure record | 206 | ||||
| Eighth failure record | 207 | ||||
| Ninth failure record | 208 | ||||
| Tenth failure record | 209 | ||||
| Eleventh failure record | 210 | ||||
| Twelfth failure record | 211 | ||||
| Start-stop order | 0x0001 start 0x0002 stop 0x0003 Fault reset 0x0030 Restore factory values 0x0031 Clear Fault |
300 |
Zhejiang Lingshine Electric Co., Ltd (Aigoodele), is a high-tech enterprise integrating production, sales and service. Our main products are 3 phase motor soft starter,frequency converter (VFD), soft starter (LSRQ), solid state relay (SSR), solid state voltage regulator (LSCR), high power rectifiers and so on (KP, ZP, MTC, MDS, MDQ, MDC, MDK, ETC). These products have been widely used in energy, petroleum, metallurgy, chemical industry, construction, plastics, textile, water supply, paper making, mining, printing and many other industrial fields. In addition, our products not only perform well in the domestic market, but have also been exported to dozens of countries and regions in Asia, Africa, Europe and other continents, winning wide international recognition.
We look forward to cooperating with every customer, welcome your guidance and suggestions, and work together to create a more brilliant future.
Q1.Can you provide price sheet and catalog to me ?
We are pleasure to provide these to you for reference,you can contact me,give me your emails ID.
Yes,Sample order is available for quality check and market test .but you need to pay the sample fee and shipping cost
Q3.How long is your lead time?
2-3 days for the stocks items, mass production generally needed 1-2 weeks.
Q4.What's your payment terms?
We usually accept all kinds of payment terms.Such as T/T,L/C,Western Union.Cash.
Q5.What's your warranty terms?
We offer 12 months warranty time.
Q6.Do you have the products in stock?
Depends on your request,We have standard models in stock.Some special products and big order will be newly produced according to your order.
Q7 How about your payment and shipment?
Payment: We accept T/T, Western Union, Paypal, Cash etc.
We usually ship via DHL, UPS, FedEx or TNT, SF for small order and via ocean for bulk order according to your requirement.
Q8.How does your factory do the quality control?
Quality is priority,we always attach the importance to quality control from the beginning to the end of the production.every product will be fully assembled and carefully tested before packing and shipping.
